Vaillant VRC 430f Installation Manual download pdf (Page 18)

Operating Manual VRC 430 0020042468_0218

The input field is highlighted.

⇒ Turn the right-hand dial until the desired value is

displayed (values from 0.2 to 4.0 are possible, see

Fig. 4.15).

⇒ Press the right-hand dial.

The desired heating curve is set. The display changes

from highlighted to normal.

4.7.4 Entering parameters for hot water generation

If the heating unit also heats your hot water, you can

enter the set target temperature on the controller.

⇒ Turn the left-hand dial until screen 10 "Hot water

parameters" is displayed.

The cursor



is located in front of the value for the set

target temperature.

⇒ Press the right-hand dial.

The input field is highlighted.

⇒ Turn the right-hand dial until the desired value is

displayed (values from 35 °C to 70 °C in increments

of 1 °C are possible).

⇒ Press the right-hand dial.

The desired set target temperature is set. The display

jumps highlighted to normal.

Caution!

Risk of being scalded by hot water!

At the draw-off locations for the hot water

there is a danger of scalding at temperatures in

excess of 60 °C. Young children and elderly

persons can be in danger even at lower temper-

atures.

Select the target temperature so that nobody

is in danger.

4.7.5 Renaming the heating components

Screen

14 indicates which components you can re-

name.

> Select

Change

names

HC1

DHW



HC1

Bathroom 1

Fig. 4.17 Screen 14 (example)

You can enter a new name to the right of the colon

(numbers 0-9, spaces, capital/small letters). Proceed as

follows:

⇒ Turn the left-hand dial until screen 14 "Change

names" is displayed.

⇒ Turn the right-hand dial until the cursor



is in front

of the name you wish to change.

⇒ Press the right-hand dial.

The characteris highlighted.

⇒ Turn the right-hand dial until the desired letter or

number is displayed.

⇒ Press the right-hand dial.

The character is accepted. The character switches from

highlighted to normal.

⇒ Turn the left-hand dial clockwise by one click.

The next character is marked by the cursor.

⇒ Press the right-hand dial.

The character is highlighted.

⇒ Turn the right-hand dial until the desired letter or

number is displayed.

⇒ Proceed in the same way for the rest of the charac-

ters in the name.

Note!

You can delete entire names or extra charac-

ters by entering spaces.

4 Operation

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments

Vaillant VRC 430f Installation Manual Page 18

Comments to this Manuals

Related products and manuals for Thermostats Vaillant VRC 430f