Vaillant aquaPLUS VUI 362-7 Service Manual download pdf (Page 15)

Boiler Installation Sequence 5

Instructions for installation and servicing aquaPLUS VUI 362-7 15

5.3 Fitting the boiler hanging bracket

Fix the hanging bracket (2) to the wall using the fixings

supplied. (it may be necessary to use additional or

alternative fixings to ensure adequate support).

Fig. 5.4: Fitting the boiler

5.4 Install the flue system

Install the flue system (refer to separate air/flue duct

installation instructions).

5.5 Fitting the boiler

• Lift the boiler (3) up to the wall so that it is slightly

above the hanging bracket (1).

• Lower the boiler slowly onto the hanging bracket so

that the slots at the rear of the boiler fully engage

onto the hanging bracket (1).

Note: If the boiler is to be fitted in a timber framed

building ensure that the bracket is secured to a

substantial part of the timber frame capable of taking

the weight of the boiler.

Note: Lift the boiler from either side at the centre of

the bottom edge.

5.6 Removing boiler casing

• Turn both securing fasteners (1) anti-clockwise by 90°

to release control panel (2).

• Pull the case (3) forward at the bottom to disengage

from the securing clips.

• Lift the case slightly to clear the top locations and

pull forward to remove.

Fig. 5.5: Remove of boiler casing

VRC-VC

90°90°

834702_33GB_012005.qxd 09.03.2005 16:26 Uhr Seite 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

No comments

Vaillant aquaPLUS VUI 362-7 Service Manual Page 15