Vaillant Flue pipe Specifications download pdf (Page 20)

20 Instructions for installation and servicing ecoTEC 839592_12

4.2.2 Unpack the boiler

To unpack the boiler, cut both plastic carton straps,

open box and lift out the polystyrene top packing. Lift

the cardboard box upwards.

Note

Care should be taken not to scratch the white

surface of the boiler casing.

4.2.3 Using boiler template

60/100

256723_01 01 2005

165

180

175

1065

450

Fig. 4.2 Assembly template

• Fix the paper template to the wall ensure that the

template is vertical.

The template shows:

– The position of the fixing holes for the boiler

mounting bracket.

– The position of the connections.

– The position of the flue exit hole.

• Mark the position of the hanging bracket fixing holes.

• Drill 2 holes Ø 10 mm for the hanging bracket.

Note

Use alternative fixing holes where necessary.

4.3 Flue exit

• If using rear flue mark the position of the air/flue duct

and its circumference.

Other flue options

Flue instructions for other flue systems such as vertical

RSF flues, flues run to the side of the boiler and the use

of additional bends etc. are detailed in the flue

installation instructions provided with the boiler.

• Remove the template from the wall and plug the

drilled holes using the wallplugs supplied.

4.4 Fitting the boiler hanging bracket

Fig. 4.3 Appliance with hanging bracket

• Fix the hanging bracket to the wall using the plugs

and screws provided with the appliance.

Note

Use alternative fixing holes where necessary.

Note

If the boiler is to be fitted in a timber framed

building ensure that the bracket is secured to a

substantial part of the timber frame capable of

taking the weight of the boiler.

4 Boiler installation sequence

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Comments to this Manuals

No comments

Vaillant Flue pipe Specifications Page 20

Comments to this Manuals

Related products and manuals for Water heaters & boilers Vaillant Flue pipe